IPM 60
The IPM60 realizes two registration holes and the anti-reverse one necessary for the correct superimposition of inner layers performed, on a second step, by Piergiacomi?s spot welding systems AMM10 or AMM20. The IPM 60 full optionals, is provided with an instrument for measuring the distance between the two punching or drilling heads (absolute linear encoders) in order to obtain a more precise working cycle set-up. Furthermore, the machine is equipped with automatic unloading system which improves its productivity. If the customer asks for it, the IPM 60 can be supplied with the heads interchangeability option. In this way it will be possible to change drilling heads or punching heads according to materials that have to be drilled or punched. By means of two video cameras and a special vision system, the IPM machine brings the markers, etched on the layer, on the right position and drives the punches (or drills) to make the holes that will be used, in a second step, on two centering pins. it is also possible to perform the drilling of the reference holes on the multilayer after the copper foil has been removed. Starting from one of the two basic models IPM 60/P with punching heads, IPM 60/D with drilling heads, it is possible to build up the machine according to his needs.
Specification:
- Maximum panel dimensions: 760 x 610 mm
- Minimum panel dimensions: 400 x 250 mm
- Maximum inner thickness: 0,7mm for the punching and 3,2mm for the drilling
- Standard holes diameter: max 2,3mm for the punching and from 1 to 5 mm for the drilling
- View area: 5x5mm
- Working cycle: less than 10 sec
- New job setting time: less than 2 minutes
- Power consumption: less than1 kW
- Voltage: 230V
- Air compressed pressure: 0,6-0,7 Mpa
- Air compressed consumption: less than 80 Nl/min
- Dimensions: 110 x 110 x 153cm
- Weight: 245 kg
- CE approved.